The CRIOX SYSTEM, a great success patent of ITALVACUUM, is a rotary vacuum dryer able to total extract water and other solvents from the wet powders coming from filtering or centrifuge vacuum pump system.

The central body of the CRIOX system is made of a biconical chamber with a variable speed rotation, characterized by soft lines without edges and sharp corners. During the system rotation, this structure helps the continuous revolution of the mass to be dried and allows a homogenous and delicate remixing vacuum pump system.

Within the drying chamber there are to lump-breaking knives with variable speed. Through the rotation of the chamber, the lump-breaking group goes in and out from the product alternatively, cleaning itself when it emerges vacuum pump system.

The lump-breaking knives break the possible wet pre-existing blocks in the mass and during the drying phase they mill and pulverize the product vacuum pump system.

For loose products this means an end product that is ready for sacking, while for the other products this means a controlled final granulometry vacuum pump system.

The mechanic action of the chamber and the lump-breaking knives allow to increase the product surface exposed to the evaporation and therefore to carry out the vacuum drying in a very short time and with a temperature that - on the average - is much lower than in any other dryer vacuum pump system.

This is an advantage for the purity of the most delicate thermo sensitive products as it avoids their degradation and respects their chemical integrity vacuum pump system.

Not only that: Also the wet extraction is certainly higher, because the mass core is constantly penetrated by the powdering knives that increase the surface exposed to the evaporation vacuum pump system.

	CRIOX system peculiarity
	More Info